PDA

View Full Version : Servo Gear Replacement


tkrahlin
01-27-2010, 06:18 PM
Has anyone had any luck replacing the gears in E-Flite S75 servos?

If so, what’s the process? Step-by-step if you can…
CLSSY56
01-27-2010, 06:42 PM
Yes I have, the Blade CP used them. Are you having problems?
tkrahlin
01-27-2010, 06:51 PM
Yes I have, the Blade CP used them. Are you having problems?

Getting/keeping the gears centered so it has equal travel each way?

Is there a particular type of lube you should use?
CLSSY56
01-27-2010, 06:56 PM
white lithium grease
Mike
01-28-2010, 06:34 AM
Getting/keeping the gears centered so it has equal travel each way?
The servo should center on it own.
CLSSY56
01-28-2010, 06:52 AM
I did have one that the centering pot got damaged in disassembly. That may be your problem. The other few times, I didn't have an issue.