E-Fest 2010

[WingingIt74]

I would like to thank all the sponsors and pilots that were there. This was my first time to an event, so I'll let the pics and videos tell the story.

David Eichstedt and John Redman, it was nice meeting you both. John, thanks for the binding tip for the mSR.

And now for our feature presentation.....

http://www.gpe-fest.com/images/gpm-efest-logo-lrg2.gif

http://www.youtube.com/watch?v=ZA4STM8LSPU

http://www.horizonrcflyers.com/forums/picture.php?albumid=33&pictureid=566

http://www.horizonrcflyers.com/forums/picture.php?albumid=33&pictureid=567

http://www.horizonrcflyers.com/forums/picture.php?albumid=33&pictureid=568

http://www.horizonrcflyers.com/forums/picture.php?albumid=33&pictureid=569

http://www.youtube.com/watch?v=emRB_zHfr5s

This looks like a new takeoff of an old balsa kit that was made back when I was in junior high by a Japanese guy, believe his last name started with a "M".
http://www.horizonrcflyers.com/forums/picture.php?albumid=33&pictureid=574

http://www.horizonrcflyers.com/forums/picture.php?albumid=33&pictureid=573

http://www.horizonrcflyers.com/forums/picture.php?albumid=33&pictureid=572

http://www.youtube.com/watch?v=BRijioFnttM

http://www.horizonrcflyers.com/forums/picture.php?albumid=33&pictureid=571

http://www.horizonrcflyers.com/forums/picture.php?albumid=33&pictureid=570

http://www.youtube.com/watch?v=g6CqarWq03A

http://www.horizonrcflyers.com/forums/picture.php?albumid=33&pictureid=575

[WJCJR1]

Nice stuff, looks like a nice time had by all and quite a few pilots, which is AWESOME.

The scale flying competition looked terrific with the 727 being my favorite, not because of it's luster but because of it's originality in a micro scale competition. That lumbering 727 looked just like my Apprentice when I hung the handheld GPS on it too far forward and she couldn't hardly pull her nose off the ground. I swear looked just like it with full throttle and full up elevator.

Any new product releases or hint of a suprise product release?

Thanks for going and sharing with us all and good videos!

Wayne

[WingingIt74]

This looks like a new takeoff of an old balsa kit that was made back when I was in junior high by a Japanese guy, believe his last name started with a "M".
http://www.horizonrcflyers.com/forums/picture.php?albumid=33&pictureid=574

http://www.horizonrcflyers.com/forums/picture.php?albumid=33&pictureid=573





Finially found it flipping through my 11/1995 RCM Magazine.
It's based on a North Star made Laddie Mikulasko, which was sold by Balsa USA.
5065