HorizonRcFlyers - Your RC Plane and Heli Forum!!

Results 1 to 5 of 5

Thread: How do I inhibit points on the throttle curve for 9503?

  1. #1
    Member 170 mph Club RotoDoc's Avatar
    Join Date
    Nov 2010
    Location
    New Bern
    Posts
    1,816

    Default How do I inhibit points on the throttle curve for 9503?

    On a JR 9503, can somebody explain how I set "INH" on any given point of a throttle curve? The 9503 has seven points and I want to inhibit points 2,3,4,5. Point L is 0 and H is 90. I want a straight curve from 0-90, but can't get the other points to INH.
    Gravity works every time...

  2. #2
    Senior Member TimberWolf's Avatar
    Join Date
    Aug 2011
    Location
    Minnesota
    Posts
    713

    Default

    I don't have this TX, but try setting points 2, 3, 4, 5 and H to 90.

    If that doesn't work (if it doesn't push 2,3,4,5, and H to the same point on the right), set {L,2,3,4,5,H} to {0, 18, 36, 54, 72, 90}.

  3. #3
    Member 170 mph Club RotoDoc's Avatar
    Join Date
    Nov 2010
    Location
    New Bern
    Posts
    1,816

    Default

    I figured it out. Highlight the throttle point and select. Now press the "clear" button to select "INH".
    Gravity works every time...

  4. #4
    Senior Member TimberWolf's Avatar
    Join Date
    Aug 2011
    Location
    Minnesota
    Posts
    713

    Default

    cool. so how are you liking the 9503? I wish it were compatible with the tm1000...but then again one can do telemetry with an iPod and a dongle now.

  5. #5
    Member 170 mph Club RotoDoc's Avatar
    Join Date
    Nov 2010
    Location
    New Bern
    Posts
    1,816

    Default

    9503 is my tx of choice now. had a dx8, and HH replaced it with a 9503 after warranty issues. no regrets with the jr.
    Gravity works every time...

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •